Quality 200A Double Phase Plug-In Busbar Pan Assembly

ETS6 series of circuit breakers are new upgraded circuit breakers researched and developed by the company combined with the advantages of similar international products and demand of domestic and international markets. With insulation voltage up to 1000V, the circuit breaker is applicable for distribution systems of AC50Hz, rated working voltage 690V and rated working current from 10A to800A, used to distribute electric power energy, protect circuits and power equipment against overload, short circuit, under voltage and so on, also can be used for infrequent startup of motor and protect it from overload, short circuit or under voltage. It is featured with small size, high breaking, short flash over, etc., is the ideal product for users. It can be vertically installed or horizontally installed. ETS6 series DC Molded case circuit breaker (hereinafter referred to as circuit breaker) is suitable for DC systems of rated voltage up to and including DC 1000V and rated current 10~800A, used to distribute electric power energy, protect circuits and power equipment against overload, short circuit and so on. The products can be fed with wires from top and bottom, and it is polarity-free. It complies with the standards IEC60947-2, GB14048.2, etc.Standards: EN/IEC 61439 -2 Rated current: 125A, 200A, 250A Operating Voltage: 400/415V Frequency: 50/ 60Hz Incomers: MCB, MCCB, Isolator No. of ways: 4, 6,8,10,12,14,16, 18, 20,22,24W, Fully shrouded continuously rated copper busbar Copper purity: more than 99.7% Copper bar with tin plated finishing Rivet type(outgoing bar riveted on the main bar)1. Fire-proof material for the isolation case 2 .Incoming switch: Mcb, Isolator, Elcb, MCCB up to 200A 3 .Outgoing: up to 72poles way MCB, in 25mm interval: any kind of plug-in MCBs 4 .Installation base as required: Base can be fabricated separately for branch, and main breaker 5. According different main breaker make the suitable connection link. 6. According to the revolved washer, can adjust the height of the base in order to adjust the breakers height in the DB.

Standard	IEC61439-2:2011
Rated current:	200A
Copper Thickness	2.5mm
Material	Tinned plated copper purity 99.7%
Incomer	MCB,Isolator,ELCB,MCCB up to 250A
Outing going	up to 72 poles way any kind of MCB
No. of Way	4W,6W,8W,10W,12W,14W,16W,18W,20W,22W,24W
Branch breaker	Plug in type MCB

Two phase Plug in model busbar pan assembly 200A, ETB05 Double phase Plug in Pan assembly

PRODUCTS DETAILS

Hot Products

DS08 Row type single phase distribution board

DS09 Row type single phase distribution board

1P+N, RCBO, B, C curve,ETM8RF , Residual Current Breaker with Over-Current protection, din rail

1P+N, RCBO, B, C curve, ETM3RF, Electronic Residual Current Breaker with Over-Current protection, din rail

DT06 Series Up to 125A din rail three phase distribution board

Surge Protective Device

Mini Isolator Switch, ETG4-125 series Isolating switch, main switch, 1P, 2p, 3p, 4p

ETB01 Three phase Pan assembly

ETB04

Manufacturer Low Voltage Cut Out Fuse

Contact us