High-quality RCCBs, RCDs & Circuit Breakers | Factory Direct

ETM8L series RCCB conforms to the iec 6 1008-1 standard ETM8L RCCB rated current is 25-100 ampere, 25A, 40A, 63A, 80A, 100A. The short circuit breaking capacity is 10 KA and 6 KA The rated residual operating current is 10 to 300 mA Rated insulation voltage: 230 Volt or 240 Volt for 2poles and 400 Volt or 415 volt for 4poles It has double poles (1P+N) , and four poles (3P+N) There is a position indicator equipped on the products, Red is on, Green is off. The RCCB Equipped with a test button to check the health of the device. Equipped with neutral terminal The RCCB terminals are are IP20 protection which is designed for finger and hand touch safe to keep the safety during installation. The ETM8L can work reliably in harsh environment, in ambient temperature from -25°C to 55°C. The electrical life can be up to 8000 operations and mechanical life up to 20000 operations, while the IEC requirement is only 4000 operations and 10000 operations. It’s mounting type is to be mounted on din rail EN60715 35mm.

Standard	IEC/EN 61008-1
Electrical	type(wave form of the earth leakage sensed)		AC,A,AC-G,A-G,AC-S,A-S,A-SI
features	Rated current in	A	25,40,63,80,100
	Poles		2P 4P
	Rated voltage Ue	V	230/400,240/415
	Rated sensitivity I△n	A	0.01 for 25A,0.03,0.1,0.3
	Insulation coltage Ui	V	500
	Rated residual making	A	500(In=250A/40A),1000(In=80A/100A)
	and breaking capacity I △m	A	630(In=63A)
	Short-Circuit current Inc=I △n	A	6000/10000
	break time under I △n	S	≤0.1（Normal type),10ms~300ms(G type).150ms~500ms(S type)
	Rated frequency	Hz	50/60Hz
	Rated impulse withstand voltage(1.2/50)Uipm	V	6000
	Dielectric test voltage at and ind.Freq.for 1min	KV	2.5
	Pollution degree		2
Mechanical features	Electrical life		2000
	Machanical life		2000
	Fault current indicator		Yes
	Protection degree		IP 20
	Ambient temperature(with daily average≤35°C)	°C	-25~+55
	Storage temperature	°C	-25...+70
Installation	Terminal connection type		Cable/U-type busbar/Pin-type busbar
	Terminal size top/bottom for cable	mm²	50
		AWG	18-3/18-2
	Terminal size top/bottom for busbar	mm²	44485
		AWG	18-8/18-5
	Tightening torque	N*m	2.5
		In-lbs.	22
	Mounting		OnDIN rail EN 60715(35mm)
			by means of fast clip device
	Connection		From top and bottom

2P, 4P, 1P+N, RCCB, RCD, Residual Current Circuit Breaker, up to 100A

PRODUCTS DETAILS

Hot Products

1P, 2P, 3P, D curve, MCB, ETM1, AC, miniature circuit breaker, molded case circuit breaker

ETB04

DS09 Row type single phase distribution board

1P+N, RCBO, B, C curve, ETM3RF, Electronic Residual Current Breaker with Over-Current protection, din rail

Two phase Plug in model busbar pan assembly 200A, ETB05 Double phase Plug in Pan assembly

Mini Isolator Switch, ETG4-125 series Isolating switch, main switch, 1P, 2p, 3p, 4p

1P, 2P, 3P, B C D curve, MCB, ETM7, AC, miniature circuit breaker, plug in

ETB07

1P+N, RCBO, B, C curve,ETM8RF , Residual Current Breaker with Over-Current protection, din rail

DT06 Series Up to 125A din rail three phase distribution board

Contact us